Advance Adapters 303020A - Manual

ADVANCE ADAPTERS INC. P/N: 303020A
P.O. Box 247, 4320 Aerotech Center Way New Item: (2/08)
Paso Robles, CA 93447 PAGE 1 OF 9
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 06-7-13
KIT CONSISTS OF:
No. Qty Part No. Description
1 1 302051-RLE BASE- TWIN STICK MOUNT 42RLE
2 1 302080 STUD BOLT 1/2"-13 X 7 (XJ)
3 1 303120 SERRATED LOCK NUT 1/2" X 13"
4 1 303121 NUT- 1/2"-13 PLATED
5 1 303303 RETAINER- SHIFTER BODY BARREL
6 2 303305 BARREL- TWIN STICK CABLE
7 1 303307 ATLAS CABLE BRACKET
8 2 303309 CABLE-ATLAS SHIFTER 48" LENGTH 1" TRAVEL
9 4 303312 BUSHING- IGUS 3/8"
10 2 303313 HEIM JOINT- FEMALE 1/4"-28
11 2 303316 OUTER NUT- CABLE RETAINER
12 2 303317 NUT- CABLE SHIFTER- JAM 1/4-28
13 1 **303318 BLOCK- CABLE ADAPTER 42RLE ATLAS
14 1 **303319 NUT- RETAINING CABLE 42RLE ATLAS
15 1 **303321 REATAINING RING-5/8X.050 ROTO CLIP(SHR-62)
16 1 303325 TUBE- ATLAS SHIFTER EXTENSION 4.25"
17 1 303330 BOX- TJ CABLE SHIFTER ATLAS
18 1 303331 TJ CABLE SHIFTER HANDLE RIGHT
19 1 303332 LEVER- ATLAS CABLE SHIFTER TJ LEFT
20 2 303333 MOUNT- ATLAS CABLE SHIFTER TJ PIVOT
21 1 303334 TJ CABLE SHIFTER BOTTOM COVER
22 2 303335 KNOB MOUNT-CABLE SHIFTER TJ
23 1 303336 ALUMINUM KNOB TJ CABLE FRONT
24 1 303337 ALUMINUM KNOB TJ CABLE REAR
25 6 303339 BOLT- 1/4"-28 x .75" F.H.C.S.
26 2 303342 SET SCREW-#6-40 X 3/16" C.P.S.S.
27 2 303343 Access plug
28 1 303344 Pivot Dowel Pin (Ground) 2.25"
29 15 303345 Sealant - Butyl Tape
30 4 303346 BOLT- 1/4"-28 X 5/8" S.H.C.S.
31 6 340615 BOLT- 1/4"-20 X 5/8" B.H.C.S.
32 2 723729 S.H.C.S. 3/8"-16 X 1-3/4"
33 3 723731 S.H.C.S. 3/8"-16 X 1" ZINC
** ASSEMBLE COMPONENTS
ATLAS T/C JEEP TJ & (XJ 84-01)
CABLE SHIFTER
42RLE Transmissions note:
42RLE Transmissions have some
clearance issues with the tailhousing
on one of the new shifter cables. If
you have the 42RLE transmission,
you will need to use the upper cable
support hole on bracket 303307.
This cable support hole moves the
inside cable away from the trans-
mission tailhousing gives you the
needed clearance. We have in-
cluded a shift rail link bar that pro-
vides the correct alinement of the
Atlas shift rail to the new cable
location on the 303307. The Atlas
base mount 302051-RLE has been
modified to clear the new link bar
assembly. If you are using the link
bar assembly, see the last page of
this instruction sheet.