Advance Adapters 303009A - Manual (Page 2)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
ADVANCE ADAPTERS INC. P/N: 303009A
P.O. Box 247, 4320 Aerotech Center Way New Item: (05/04)
Paso Robles, CA 93447 PAGE 2 OF 5
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 11-10-11
ATLAS TRANSFER CASE CABLE SHIFTER
SOLD WITHOUT AN ATLAS
NOTE ON THIS KIT: This kit is a universal-type cable shifter assembly. Mounting the shifter is left to the installer. The shifter
can be mounted flush with the floor so that the cables exit underneath the floor, and the shift boot flange is bolted directly to the floor.
Otherwise, the shift cables will need to be routed through the floor and the shifter bolted wherever you desire.
NOTE ON SHIFTING: The Atlas Transfer case is a synchronized unit. The transfer case shifts best when the shafts are spinning.
Note that when the transfer case is shifted when not in motion, the teeth may or may not be aligned. If the teeth are aligned, then the
unit will slip into gear easily. If the unit does not slip into gear easily, then no amount of pulling on the handle will cause the unit to
shift. The transfer case must be spun slightly and then it will shift.
Depending on the orientation of the shifter housing in the vehicle, the black shift knobs may be labeled backwards. Unfortunately,
we are unable to get a small quantity of the black knobs with a shift pattern labeled opposite compared to the knobs included in
this kit. We can offer a set of aluminum knobs which are labeled either way.
P/N 303152AA $42.95 set
P/N 303150AA $42.95 each
This shifter will not fit the
Allison transmission due to
cable interferance with the
stock adapter housing.
P/N 303152 $42.95 set
standard pattern
P/N 303150 $42.95 each
reverse pattern