Snorkel ATB50 CE - Manual (Page 22)

u
Emergency Stop Switches
x
At Ground Control Box
Press the large red Emergency Stop switch in, at
any time, under any conditions, and the entire
machine stops, the engine turns off, the brakes
automatically set, and nothing moves.
This switch must be pulled out (on) for anything
on the ATB 42/50 to work.
A
CAUTION
The ground control box is designed to override
the platform control box.
If the platform control box Emergency Stop
switch is down (off) the ground control box can
still be used to start and operate the ATB 42/50.
x
At Platform Control Box
Press the large red Emergency Stop switch down
(off) and the entire machine stops, the engine
turns off, the brakes automatically set, and
nothing moves.
This switch must be pulled to its up (on) position
to control the ATB 42/50 from the platform.
u
Flashing Lights
The optional flashing lights alert people that the
ATB 42/50 is present. The lights flash at about
one flash per second any time the Battery,
Emergency Stop (at the ground), and Master Key
Switch are all ON.
There is no ON/OFF switch for the flashing lights.
page 2 - 4 ATB 42/50 – 0161987EE
2. Safety Devices