Smittybilt SB76880 XRC Armor Front Fender Kit - Manual

For Technical Support/Warranty Information please call 310-762-9944
Smittybilt, 400 W Artesia, Compton, CA 90220
Installation Instructions:
(Part # SB76880)
XRC Armor Front Fender Kit
Revised 02.08.11
NOTE: Carefully read entire instructions thoroughly before attempting to install this part.
Parts Included: Qty
93-5909 Front Fender: Drvr 1
93-5917 Front Fender: Pass 1
93-5921 Fender Lip Guard: Drvr 1
93-5922 Fender Lip Guard: Pass 1
90-4275 Fender Liner: Drvr 1
90-4276 Fender Liner: Pass 1
93-5923 Outer Duct 2
93-5924 Inner Duct: Drvr 1
93-5925 Inner Duct: Pass 1
90-6745 Hardware Pack: Fender 1
3/8” X 1” SS Button Head Bolt 32
3/8” Flat Washer 32
3/8” Nylock Nut 32
3/16” X 1” Self Tapping Screw 4
Parts Included: Qty
1/4”-20 SS Button Head Bolt 12
1/4”–20 SS Nylock Nut 12
10-24 X 3/4” Hex Bolt 3
10-24 SS Nylock Nut 3
90-6746 Hardware Pack: Inner Fender Liner 1
Plastic Retainers 28
90-6747 Hardware Pack: Nutcert 1
3/8” Nutcert 2
90-6774 Hardware Pack: Nutcert Installation 1
96-5951 Nutcert Tool 1
3/8” Star Washer 1
3/8” X 2” Socket Head Bolt 1
3/8” Gr. 8 Flat Washer 1
3/8” Gr. 8 Nut: Un-plated 1
IMPORTANT!: In order to install these fenders the wiper cowl panel and the side cowl panels
must be removed from the vehicle.
(Fig A)
Windshield
Bracket
OE
Bolts
OE Bolts
WARNING: Check with Local and State laws
before installing this accessory!