Synergy 8024-30/8024-40 - JK Synergy Stage 4 Long Arm System - Manual (Page 24)

c) Tighten and torque both upper control arm bolts to 125 ft-lbs and the pinch bolt to
50 ft-lbs when final adjustment is done.
21.
INSTALL BUMPSTOP SPACERS
• Install the new rear bump stop spacers. The bump stop spacers should be oriented
so they angle forward. Use a washer under the head of the 3/8 bolts and use the
serrated nut on the bottom. Tighten to 30 ft-lbs
22.
INSTALL REAR TRACK BAR RELOCATION BRACKET