Synergy 8025 - Jeep JK Synergy Stage 1.5 Suspension System - Manual (Page 11)

• Torque the lug nuts to 85125 ft-lbs.
20. FRONT END ALIGNMENT
• The castor should be optimal with the cam bolts maxed for the most castor.
• Adjust the front track bar to center the front axle. Torque the pinch bolt to 30 ft-lbs
• Adjust the draglink to center the steering wheel by using the adjuster sleeve on the
driver side tie rod end (pitman arm end).
• If the steering wheel is not centered the ESP light will come on, so make sure you adjust
the draglink so the steering wheel is perfectly centered. This is can be done by test
driving and making the necessary adjustments. When driving in a straight line take note
of which way the steering wheel needs to turn to be centered. If the steering wheel needs
to turn right to be centered, shorten the draglink. If the steering wheel needs to turn left
to be centered, lengthen the draglink
• We recommend you have the jeep aligned by a professional alignment shop.
• Check all hardware after 500 miles of driving.
• We recommend checking all hardware before and after all off road trips to avoid failure
due to loose fasteners.
Please call you if you have any questions, we can be reached M-F 8-5 PST.