Lukas LH2 User Manual
Page 5

5
Make sure that no body parts
or clothing get between the
openly visible moving parts of
the device.
Immediately report changes
that occur (including changes
in operating behavior) to
the appropriate persons/
departments! If necessary,
immediately shut down and
secure the device!
Wear protective clothing,
protective helm with visor,
safety shoes and protective
gloves.
Check the device for visible
defects or damage before and
after use.
Working under loads is
prohibited if they are raised
exclusively with hydraulic
devices. If this work is
unavoidable, sufficient
mechanical supports are
additionally required.
Check all lines, hoses and
screwed connections for leaks
and externally visible damages
and repair immediately!
Escaping hydraulic fluid can
lead to injuries and fires.
In the event of malfunctions,
shut down the device
immediately and secure it. You
should have the malfunction
repaired immediately.
Do not make any changes
(add-ons or conversions)
on the device without the
approval of LUKAS.
Heed all safety instructions
and hazard warnings on the
device and in the operating
instructions.
All safety instructions and
hazard warnings on the device
are to be kept intact and in a
legible condition.
Make sure that all safety
covers are present on the
device and in proper working
condition.
Any work procedure that
detracts from the safety and/
or stability of the device should
be abandoned!
Safety equipment must never
be disabled!
The maximum permissible
operating pressure must not
be changed.
We advise all users before using the device to carefully read through the operating instructions
and to follow the instructions contained therein without exception.
We also recommend that you get instructed by a qualified trainer in the use of the product.
WARNING / CAUTION!
The operating instructions for the hoses, the accessories and the connected
devices must also be heeded!
Even if you have already received instruction, you should read the following safety instructions
again.