Lukas LH2 - Manual (Page 11)

11
1. Remove the closing screw of the return port
“T” and the ball behind.
2. Remove the closing screw of the pressure
line port “P” and the sealing ring behind.
3. Put the o-rings into the designated groovings
of the ports “T” and “P” .
Take care, that the surfaces are clean and
dust-free.
6.1 Basics for mounting base plates and valve blocks
NOTE:
The o-rings are always part of the
mounting kits of the designated
adapter kits!
(The appropriate mounting kits
could be found in the spare parts
lists.)