Lukas LH2 - Manual (Page 29)

29
Procedure:
1. Disassemble the retaining rings (Pos. 3.3) and extricate the bolt (Pos. 3.2).
3.2 3.3 3.3
lever unit
6.1
6.4
6.3
6.2
5. The assembly is done in reverse order. Replace all damaged parts with new ones.
ATTENTION!
When mounting the wiper, the backup ring and the o-ring, take care that they
are assembled completely in the appropriate grooves and in the right order.
3. Demount the lever unit.
4. Extricate the piston unit (Pos. 6.1) and after that remove the wiper (Pos. 6.4), backup
ring (Pos. 6.3) and the o-ring (Pos. 6.2).