Apple Using WaveBurner Pro 1.0 (with Logic Pro) - Manual (Page 39)

39
Burning a Project to a CD
When your project is complete, you burn the project to a CD. The resulting audio CD
conforms to Red Book standards and can be played on any audio CD player.
Getting Ready to Burn a CD
Before you burn your project to a CD, there are several things you should do to prepare:
m Check that the CD burner is connected, turned on, and working.
m Check that WaveBurner Pro recognizes the CD burner.
m Preview the transitions between tracks.
m Set Disc Options for the project.
Supported CD Burners
WaveBurner Pro supports all CD burners supported by Mac OS X, including SuperDrives
and external third-party CD burners.
Setting Disc Options
You can set many disc options for a project, including the following:
• Adding a UPC/EAN code
• Setting offsets for start points, stop points, and indexes
• Setting the default pause length
• Adding a period of silence at the end of the CD
• Adding CD TEXT information, including title, performer, songwriter, composer, and
arranger information, and a text message.
Adding a UPC/EAN Code
Commercially produced CDs typically include a Universal Product Code (UPC) and a
European Article Number (EAN). These codes contain information about the record
company producing the CD, and may contain additional information.
To add a UPC/EAN code:
1 Choose Disc > Disc Options, then click the General tab.
2 Type the code in the UPC/EAN Code field.
3 When you are finished, click OK.