Apple Using WaveBurner Pro 1.0 (with Logic Pro) - Manual (Page 30)

30
Fat EQ
The Fat EQ plug-in lets you apply equalization using up to five fully parametric bands,
and provides great flexibility in shaping the sound of your projects. In the Fat EQ
plug-in window, the bands are arranged in increasing frequency order from left to
right. Using the buttons numbered 1 through 5, you can turn each band on or off. The
circular slider for each band lets you set the amount to increase (boost) or decrease
(cut) the part of the signal in that band. By dragging the number in the value field
(located directly above the slider), you can raise or lower the band’s frequency. You can
set the amount of resonance or “Q” for each band by dragging the number in the value
field located just above the on/off button.
Band 1 can function as a low cut or low shelving filter. Bands 2 and 4 can be switched
from their normal operating mode as fully parametric band pass filters to low or high
shelving filters. The center band (3) always operates as a fully parametric band pass.
Band 5 can function as either a high cut or high shelving EQ. You select the filter type
for each band by turning on or off the graphic button for the band located at the top
of the plug-in window, above the graphic display.