Apple WaveBurner 1.5 - Manual (Page 37)

Chapter 3 Working With Regions 37
To reactivate the automatic setting of a manually edited fade:
1 Move the Fade length handle to the position that coincides with the beginning (or
end) of the other overlapping region.
2 When the cursor changes to a chain icon, release the Fade length handle.
The automatic fade function will be restored.
If you move the region to a position where it doesn’t overlap another region, and then
move the corresponding Fade length handle to the zero position, the automatic fade
function is reactivated.
Note: Press and hold Option to prevent reactivation of the automatic fade setting at
the chain position.
You can adjust fade-ins and fade-outs by dragging the fade handles of the region
envelope. By default, the fade curve is linear, which means that the level increases
evenly (linearly) for the duration of the fade. You can adjust the fade curve to increase
the level more quickly or slowly as the fade progresses.
Note: You can also edit your fades numerically in the Fade tab of the Region Info
window. For further information, see the Region Info window section on page 18.