Apple WaveBurner 1.5 - Manual (Page 23)

Chapter 1 The WaveBurner Interface 23
The General tab of the Index Point Info window displays the following information:
 Index Point Name
 Track Number
 Index Point Number
 Position (of the index point) Relative To Track
 Position (of the index point) Relative To Disc
The Comments tab allows you to enter notes for the selected index point.
Level Meter
The Level Meter window displays the volume level of the left and right channels of
your project—in real time, as the project plays.
To show the Level Meter window:
m Choose Window > Open Level Meter (or press Command-L).
Customizing the Toolbar
You can customize the WaveBurner Toolbar by adding buttons for the commands you
use most often.
To customize the WaveBurner Toolbar:
1 Control-click (or right-click if you have a two-button mouse) the Toolbar, then choose
Customize Toolbar from the shortcut menu.
2 Drag the buttons you want to add from the Customize Toolbar dialog to any empty
area in the Toolbar. If you drag a button to a location between two existing buttons,
they will move to make space for the new button.
3 Click Done when finished.
Note: You may also choose to drag the entire “default set” from the bottom of the
Customize Toolbar dialog, if you don’t like your customizations.
To remove a Toolbar item:
m Control-click (or right-click if you have a two-button mouse) on the desired icon, then
choose Remove Item from the menu.
The shortcut menu and Customize Toolbar dialog’s Show menu also allow you to view
Toolbar items as Icon & Text, Icon Only, or Text Only.