Apple Shake 4 New Features - Manual (Page 64)

64 Chapter 2 Major Features and New Nodes
The order in which they are connected is not important.
2 Use the clipLayer and lockedPlate pop-up menus to choose the input to which the
clean plate image is connected.
In this example you’ll be choosing Input1. Leave mode at the default setting of Precise.
3 Set the analysisRange to the number of frames you want to align.
This parameter defaults to the maximum number of frames within the longest image
sequence that’s connected to the AutoAlign node.
4 Click “analyze.”
Shake begins the image analysis. The first frame may take longer than the other frames
in the analysis. The analysis should speed up after the first frame. As the analysis is
performed, the playhead steps through the Time Bar frame by frame, creating a
keyframe at each analyzed frame.
Note: The analysis can be interrupted at any time by pressing Esc.