Handling your system, Power supply, Cleaning your equipment – Apple Xserve RAID User Manual
Page 87: Handling your system 88, Power supply 88, Cleaning your equipment 88
88
Appendix B
Handling Your System
Follow these guidelines for handling your Xserve RAID system and its components:
m When lifting or moving the system, always have two people carry it and place the unit on
a sturdy, flat surface.
m When connecting or disconnecting a cable, always hold the cable by its connector (the
plug, not the cord).
m Before removing or replacing a RAID controller module, be sure to shut down the
controller using the RAID Admin application. Failure to do so could result in data loss.
Certain components—drive modules, power supply, and cooling modules—are designed
to be installed or removed while the system is turned on and operating.
m Never force a connector into a port. If the connector and port do not join with reasonable
ease, they probably don’t match. Make sure that the connector matches the port and that
you have positioned the connector correctly in relation to the port.
m To remove a fibre channel cable from the RAID controller, push in on the connector
slightly, then squeeze the release latch and pull out the connector. If the cable does not
pull out easily, use a small flat tool, such as a tiny screwdriver or the cover from the card
slot on the host system, to squeeze the release latch.
m Don’t spill food or liquid on the system or other components. If you do, turn your system
off immediately and unplug it before cleaning up the spill. Depending on what you spilled
and how much of it got into your equipment, you may have to arrange for an Apple-
authorized service provider to inspect or repair the system.
m Protect the system and its components from direct sunlight and rain or other moisture.
m Keep all ventilation openings clear and unobstructed. Without proper air circulation, the
unit’s temperature can rise high enough to cause the system to shut down.
Power Supply
The power supplies in your system are high-voltage components and should not be opened
for any reason, even when the system is off. If a power supply needs service, contact your
Apple-authorized dealer or service provider.
Cleaning Your Equipment
Follow these general rules when cleaning the outside of your system:
Important
Do not attempt to lift or move the system by yourself. The weight of the unit
requires two people to lift and support it.