Apple Xserve RAID - Manual (Page 33)

34 Chapter 3
Mount the System in the Rack
When the brackets are secured to the rack, you can put the system in the rack.
Follow these steps to mount the Xserve RAID system in the rack.
1 With one person on each side of the system, lift it so that the bottom of the unit is level with
the lower part of the bracket.
2 Slide the system into the rack.
Slide the unit back in the rack until it
engages the small posts on the L-brackets.
With one person supporting each
side of the unit, slide it into the rack.