Apple Xserve RAID - Manual (Page 16)

Introducing Xserve RAID 17
L-shaped brackets (A1 and A2)
Two large L-shaped brackets attach to the front of the four-post rack and support the
system.
Bracket extenders for a 24- to 29-inch rack (B)
These extenders attach to the brackets A1 and A2 and to the rear rail of the standard four-
post rack.
Bracket extenders for a 29- to 36-inch rack (C and D)
Connect these two extenders and attach them to the brackets A1 and A2 and to the rear
rail of the deep four-post rack.
Solid bar for connecting bracket extension pieces (E)
Use this bar to fasten extenders C and D for a deep rack.
Screws, nuts, washers, and hex key wrench for mounting the system
Use this hardware to secure the system to the rack and to connect the bracket extenders.
See “Assemble the Brackets and Extenders” on page 27 for more information.
Mounting template
Use this template to help mount the brackets squarely to the rack. See “Assemble the
Brackets and Extenders” on page 27 for more information.