Apple Xserve RAID - Manual (Page 3)

4 Contents
3 Mounting Xserve RAID in a Rack 23
Getting Ready to Install the System 24
Determine the Position for the System in the Rack 25
Prepare the System for Installation 26
Installing the System 26
Assemble the Brackets and Extenders 27
Mount the System in the Rack 34
Secure the System in the Rack or Cabinet 35
Moving the Xserve RAID System 36
4 Connecting Xserve RAID to a Host System and a Network 37
Installing the Host Bus Adapter Card in the Host System 38
Connecting Xserve RAID to a Host System or Switch 38
About Fibre Channel Connections and Cables 38
Connecting the System to Xserve or a Power Mac G4 39
Connecting Xserve RAID to a Switch or Hub 40
Removing Cables From the Xserve RAID and Host Systems 41
Connecting to a Network 42
Connecting Power to the System 43
Connecting an Uninterruptible Power Supply 44
5 Using the Xserve RAID System 45
Starting Up the System 45
Turning Off the System 46
Using Status Lights and Other Indicators 46
If the System Has a Problem 48
6 Installing or Replacing Components 49
About Replacing Components 49
Installing or Replacing an Apple Drive Module 49
Replacing a Power Supply 51
Replacing a Cooling Module 52
Replacing a RAID Controller Module 54
Installing or Replacing a Battery Module 55
Obtaining Additional Replacement Components 56