Apple PowerBook (2400c) - Manual (Page 85)

Every time the computer starts up, it rebuilds the desktop.
m There may be a folder on your hard disk that has the same name as a file
the computer uses to keep track of information on your disks. Manually
search for a folder named “Desktop” or “Desktop file.” If you find one,
rename it “Storage.” Then restart the computer. (Do not use the Find File
feature to search for the desktop file. It may find it but you may not be able
to access it.)
When I start up the computer, the display lights up for a moment, then shuts down.
m Make sure you are using the correct power adapter for your
computer model.
m If the computer is running on the battery, make sure the battery is charged.
Or connect the external power adapter.
Problems working with programs
The computer freezes or displays a system error message.
m There may be a temporary software problem. To reset the computer, try the
following suggestions in order until the computer starts up normally:
1. If the computer freezes, you can try to quit the program you’re using by
pressing the keys Command (x), Option, and Esc on your keyboard.
Click Force Quit in the dialog box that appears. (You’ll lose unsaved
changes in that program’s documents.)
Immediately save all open documents and quit all open programs, then
restart the computer.
2. If you see a message about a system error, you may need to reset the
computer. The method of resetting you should always try first is to press
the Command (x), Control, and Power keys simultaneously. If the
computer does not restart, connect the power adapter (if it is not already
connected) and press the reset button (marked with the icon I) on the
back panel.
Note: You will lose any work you have not saved.
3. Reset the PRAM (see “The Computer Makes an Unusual Sound at
Startup, or You See a ‘Sad Macintosh’ Icon” in the section “Problems
Starting Up the Computer” earlier in this chapter for instructions).
85 Tips and Troubleshooting