Apple PowerBook (2400c) - Manual (Page 42)

If you can’t eject a card
If you are unable to eject a card, make sure the computer is off, then try
pressing the eject button. If this doesn’t work, follow these steps:
1 Straighten one end of a paper clip.
2 Insert the end of the straightened paper clip into the hole next to the slot that contains
the card, and press gently but firmly until the card is ejected.
3 Pull the card out of the slot.
If you can’t eject a card, insert
the end of a straightened paper
clip into the hole next to the slot.
This hole is for the upper slot.
This hole is for the lower slot.
42 Chapter 3