AEM 30-6310 Series 2 Plug & Play EMS - Manual (Page 14)

Page 14 of 15
30-1310 (Series 1) vs 30-6310 (Series 2 EMS differences:
The EMS functions assigned to certain pins have been changed and no longer match the
30-1310 EMS. Unless otherwise noted, the following pins and functions will need to be
manually reconfigured after using AEMTuner to convert a V1.19 (30-1310, Series 1 EMS)
calibration for use with the 30-6310 Series 2 hardware.
Pin
95-99 Eclipse
Turbo / Talon Tsi 2003-2005 Evo VIII
30-1310
function
30-6310
function Notes
7 --- --- Switch 4 N/C
Pin has no internal
connection, Switch 4
available on pin 43
32 ---
Condenser Fan
control (HI) PW 2 Idle 5
30-1313 used Idle5
also
34
Timing Adj. / LF
O2 heater Injector #10 Injector 12 Inj10 available on pin 35
38 MFI Relay control MFI Relay control Coil 5 Coil 7
Use Coil 7 settings from
6310 startup calibration
43 --- Clutch Pedal Sw HS4 Switch 4 HS4 not available
44 --- EGT 2 Switch 6
EGT 2 available on pin
61
52 --- PW #1i Coil 3 connects to pin 11
53 --- Switch 6 Coil 5
Switch 6 available on
pin 44
56 --- High Side #3 Coil 6 HS3 not available
57 --- H2O spray relay HS1 Idle 7 30-1313 used Idle7 also
60 O2 Heater Front O2 Heater Front Injector #9 Injector 11
Inj 9 available on pin 83
(54)
61
Fuel Tank Diff.
Press. sensor
Fuel Tank Diff.
Press. sensor ADCR11 EGT 2 ADCR11 not available
62
Data Link
Connector
Data Link
Connector FM Coil 4
77 --- Fuel Temperature Knock #2 CAN1L Knock #2 not available
87
Throttle Position
switch
Throttle Position
Switch ADCR14 CAN1H ADCR14 not available