AEM 30-2860 Coil-On-Plug COP Conversion Kit - Manual

WARNING:
! WARNING:
This installation is not for the tuning novice! Use this system
with EXTREME caution! If you are not well versed in engine
dynamics and the tuning of engine management systems DO
NOT attempt the installation. Refer the installation to an AEM
trained tuning shop. A list of AEM trained tuning shops is
available at www.aemelectronics.com/dealer_locator.php or by
calling 800-423-0046.
NOTE: All supplied AEM calibrations, Wizards and other tuning
information are offered as potential starting points only. IT IS
THE RESPONSIBILITY OF THE ENGINE TUNER TO
ULTIMATELY CONFIRM THE CALIBRATION IS SAFE FOR ITS
INTENDED USE. AEM holds no responsibility for any engine
damage that results from the misuse or mistuning of this
product!
AEM Performance Electronics
2205 126 th Street Unit A, Hawthorne, CA. 90250
Phone: (310) 484-2322 Fax: (310) 484-0152
http://www.aemelectronics.com
Instruction Part Number: 10-2860 Rev B
 2011 AEM Performance Electronics
P/N 30-2860 B Series COP
Conversion Kit
Instruction Manual
This product is legal in California for racing vehicles only and should never be
used on public highways.
WARNING: IT IS RECOMMENDED THAT TIMING BE CONFIRMED ON EACH
CYLINDER BEFORE ATTEMPTING TO START THE ENGINE!