AEM 30-71XX Infinity EMS Quick Start Guide User Manual
Page 10
8
© 2014 AEM Performance Electronics
Infinity Quick Start Guide
3. Next look for a device labeled something close to “AEM Infinity-10 EMS.” It may be listed
under “Other devices.” Right click “AEM Infinity-10 EMS” and select Update Driver Software.
When prompted with “How do you want to search for driver software?” select the second
option, “Browse my computer for driver software Locate and install driver software manually.”
USB driver files can be downloaded from
Save this file in an easy to find location like the Windows Desktop. You will need this link below.
**If AEM Infinity-10 EMS does not appear on the list please verify that the USB plug is
securely plugged into your computer and the ECU. Also make sure that the ECU is in fact
powered up and connected correctly. If problem persists, try turning the key off and then back to
the on position or try a different USB port on the PC.
4. Hit Browse and select the “AEM_Drivers_Signed” folder. Make sure to have the “Include
subfolders” box checked. Hit next. This will install the driver software onto your computer. You
will now be able to use the “Connect to USB” option in InfinityTuner.
AEM
recom m ends restarting your PC after m aking changes to your device driver installation.
Note: To confirm the driver installed properly you can return to your device manager window. The
“AEM Infinity-10 EMS” device will now be recognized and fall under the tab “AEM EMS
Controllers.”