Connecting and configuring your router – Belkin F5D7230AU4P User Manual

Page 20

Connecting and Configuring Your Router

Step 2 Hardware Setup

The Wizard will walk you through connecting your Router to your
computer and modem. Follow the steps on the screen using the
pictures as a guide.

2.1

This step instructs you to locate

the cable connected between your
modem and the networking port on
your computer. Unplug this cable
from the computer and plug it into
the GREEN port on the Router.
Click “Next” to continue.

2.2

This step instructs you to locate

the BLUE cable that is included
with your Router. Plug one end
of this cable into ANY one of the
BLUE ports on your Router. Plug
the other end of the cable into the
networking port on your computer.
Click “Next” to continue.

2.3

This step instructs you to locate

the power supply that is included
with your Router. Plug the power
supply’s small connector into the
GREY port on the Router. Plug the
power supply into an empty power
outlet. Click “Next” to continue.