Mueller Snap Lock (MSL) - Manual (Page 8)

8 1/8" diameter x 3/16"
Grip Range Stainless Steel
12" x 24 x 1" Tek 2
Grip Range Stainless Steel
• 5/16" Hex Head with 5/8" O.D. washer
STANDARD PARTS
Details are subject to change without prior notice.
1/4" x 14 x 1 1/4" Long Life Driller
• 3/8" Hex Head with sealing washer
1/4" x 14 x 1" Type AB Long Life
• 3/8" Hex Head with sealing washer
(Long life exterior fastener)
1/4" x 14 x 7/8" Lap Tek
• 3/8" Hex Head with 3/8" O.D. washer
1/4" x 14 x 1 1/4" Shoulder Tek 2
• 5/16" Hex Head with no washer
10 x 1" #2 Phillips
Pancake Head Self Driller
10 x 1" #2 Phillips
Pancake Head
Stitch Screw 1/2"
• #2 Phillips Drive
• Corrosion Resistant Coating
• Painted or Mill Finished Head
1/2"
Deck Screw Driller
• 2"-6" x #14
• Length determined by rigid insulation thickness
and metal deck depth.
#9 x 1 1/2" Woodgrip
• 1/4" Hex Washer Head
• 1/2" O.D. EPDM Sealer Washer
• Corrosion Resistant Coating
• Painted or Mill Finished Head
1 1/2"
#14 x 7/8" Low Profile Lap Screw
• Low Profile Design
• Large Diameter Head For Resistance
• Corrosion Resistant Coating
• Painted or Mill Finished Head
7/8"
6-Lobe
#9 x 2 1/2" Woodgrip
• 1/4" Hex Washer Head
• 1/2" O.D. EPDM Sealer Washer
• Corrosion Resistant Coating
• Painted or Mill Finished Head
2 1/2"
1", 1 1/2", 2 1/2" Low Profile Head
• 1/2" Head Diameter Phillips Drive
• Corrosion Resistant Coating
• Painted or Mill Finished Head
1 1/2"
#9 x 1" Woodgrip
1"
• 1/4" Hex Washer Head
• 1/2" O.D. EPDM Sealer Washer
• Corrosion Resistant Coating
• Painted or Mill Finished Head
8