Mueller Snap Lock (MSL) - Manual (Page 42)

42
FIXED ENDLAP
|
WOOD DECK
Wood Deck
Underlayment
2
3
4
5
1
1 1/2"
6 "
Mueller Snap
Lock Upper
Panel
Mueller Snap
Lock Lower
Panel
#12 x 1 1/2"
Woodgrip Screw
Sealant
Mueller Snap Lock
Lower Panel
Mueller Snap
Lock Upper Panel
#12 x 1 1/2"
Woodgrip Screw
Sealant
Installation Steps (Both the ridge and eave are floating):
1. Install lower panel as detailed in the installation instructions.
2. Install butyl tape sealer on the lower panel, centered over the backup channel 4 ½” from the upper end of the
panel. Start at the outside bottom of the female rib, extending up and over the rib, down to the pan of the
panel, across the width of the panel, and up and over the male rib as pictured.
3. Install the upper panel by snapping it over the lower panel. Fasten using five screws in the fastener
sequence shown.