Mueller Snap Lock (MSL) - Manual (Page 36)

36
FLOATING VALLEY
|
WOOD DECK
Installation Steps: (use only with fixed Ridge/Hips)
1. Install Valley Trim over the Valley from the bottom up. Secure with #10 x 1 woodgrip pan head
screws (5’ centers).
2. Install butyl tape sealant 4” to 5” from center of the valley trim.
3. Install edge plates over the butyl tape sealant using #10 x 1 woodgrip pan head screws on 12” centers.
4. Field cut and hem panel ends. Install over edge plate as shown.
5. Seal the ends of the panel legs using tube sealant.
Wood Deck
Underlayment
Mueller Snap
Lock Panel
Valley
Trim
4" Typical
Tape
Sealant Edge Plate
#10 x 1" Pan Head
Woodgrip Screw