Mueller Snap Lock (MSL) - Manual (Page 31)

31
Installation steps:
1. To begin starting panel you must first attach the Slotted Rake Angle to the existing rake using #14x1¼” SD
Shoulder tek screws, 12” on center.
2. Place the female leg of the first panel over the upturned edge of the Slotted Rake Angle.
3. Install Rake Trim Support Angle as pictured using tri bead sealant and secure using #12x1¼” SD screws thru
the Rake Trim Support Angle, tri bead, panel leg and into the 14 ga. Slotted Rake Angle, 12” on center.
Tri-Bead Sealant Tri-Bead Sealant
Rake
Trim
Rake Slide Trim
#14 x 1 1/4 " SD
Shoulder Screw
on 12" Centers
Mueller Snap Lock Sheet
Underlayment
Wood Deck
#14 x 7/8" Lap Tek Screw
#9 x 1 1/2"
Woodgrip Screw
Rake Trim
Support Angle
#12 x 1 1/4" SD Tek
Hex with Washer on 12" Centers 14ga Slotted
Rake Angle
End View
FLOATING RAKE DETAILS
|
WOOD DECK