Mueller Snap Lock (MSL) - Manual (Page 33)

33
Installation Steps: (use only with floating ridge/hip)
1. Install eave trim onto the eave using #10 x 1 pan head screws, 3 per 10’.
2. Apply butyl tape sealant to top leg of the eave trim as shown.
3. Install panel and screw to the eave using 1 ½” screws. Panel should overhang the eave trim by 1 ¼” to
accommodate optional gutter.
4. Seal the ends of the panel legs using tube sealant.
Mueller Snap
Lock Sheet
Lap Tek Low Profile
Wood Deck
Underlayment
Woodgrip
Screw
(for Eave Trim Only)
Eave Trim
Sealant #10 X 1"
Pan Head
Woodgrip Screw
Clip
1 1/2" Low
Profile Woodgrip
2
3
4
1
Optional
Gutter
FIXED EAVE
|
WOOD DECK