SkyTrak 6036 Operation Manual - Manual (Page 66)

60 Model 6036
Operation
Starting Travel
1. Enter the operator cab, fasten the seat belt, start the engine, apply
the service brake pedal and disengage the parking brake switch.
Place the Neutral Lock Lever in the (D) DRIVE position.
2. Rotate the twist grip (Figure 37, 1) of the range select lever to 1st
gear.
3. Move the travel select lever to (F) FORWARD to travel in a forward
direction or to (R) REVERSE to travel backward.
4. Slowly remove your foot from the service brake pedal and press the
accelerator pedal to start travel.
IMPORTANT! Check for warning lights frequently during operation. Any
abnormal indication should be corrected as soon as practical.
Changing Travel Direction
1. Stop the vehicle by applying the service brakes.
2. Grasp the travel select lever (Figure 38, 1), pull it toward the steer-
ing wheel (2), then move the lever up or down in the opposite direc-
tion; (R) REVERSE or (F) FORWARD.
Figure 37
Operating
OH1802
1