SkyTrak 6036 Operation Manual - Manual (Page 139)

General Maintenance
133 Model 6036
3. Attach a remote portable hydraulic pressurizing unit to the parking
brake gauge port (Figure 86, 1) on the secondary function manifold
(2) mounted on the inside wall of the frame (3) on the left side next
to the transmission.
Figure 86
4. Turn the key switch to the ON position (with the engine not run-
ning), release the parking brake switch, and have the operator
seated in the seat.
CAUTION:
DO NOT exceed 575 psi (40 bar) when pressur-
izing the park brake. Applying too much pressure may damage
the brake seals.
2
OA1230
Front
1
3