SkyTrak 6036 Operation Manual - Manual (Page 48)

42 Model 6036
Operation
Worklight Switch (Front, Rear & Boom Worklights)
(Figure 25)
This three position rocker switch (Figure 25, 1) controls the front, rear and
boom worklights. The switch (1) is located in the upper switch bank on the
right side dash panel. These lights will only operate when the ignition switch
is in the RUN position.
• Push the top of the switch in to turn all the
worklights OFF.
• To turn the front and boom worklight ON,
position the rocker switch to the center
position.
• Push the bottom of the switch in to turn all the
worklights ON.
Figure 25
OH2570
OH2591
OH2611
OH2601
OH1852
1