Philips LC1345 - Manual (Page 45)

45
Indicators and Projector Condition
13. Appendix
Indicators and Projector Condition
Check the Indicators for projector condition.
• • • on • • • dim • • • off • • • flashing
✽ When the life of the projection lamp draws to an end, the Lamp Indicator lights yellow. When this indicator lights yellow, replace
the projection lamp with a new one promptly. Make sure to reset the Lamp Replace Counter after its replacement.
The projector is Off. (The AC power cord is unplugged.)
The projector is ready to be turned on with Standby/On button
on the top control or on button on the remote control.
The temperature inside the projector is abnormally high. The
projector cannot be turned on. When the projector is cooled
down enough and the temperature returns to normal, the
Standby Indicator lights on and the projector can be turned on.
(The Temperature Warning Indicator keeps flashing.) Check
and clean the Air Filter.
The projector is being cooled down. It cannot be turned on until
the Standby Indicator lights on.
Projector Condition
The projector is operating normally.
The projector is cooled down enough and the temperature
returns to normal. When turning on the projector, the
Temperature Warning Indicator stops flashing. Check and
clean the Air Filter.
Lamp
yellow
Indicators
Standby
green
Power
red
Temperature
Warning
red
The projector detects an abnormal condition and cannot be turned
on. For details of this symptom, refer to page 39.
The projector is in the Power management mode.
✽
✽
✽
✽
✽
✽
✽