Philips LC1345 - Manual (Page 32)

32
9. Video Input
Selecting Video System
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
Selecting Video System
Press Menu button to display the On-Screen Menu. Press
Cursor Left/Right buttons to select AV System Menu icon.
Press Cursor Down button to select the system to be required
and then press OK button.
If the projector cannot reproduce proper video image, it is
necessary to select a specific broadcast signal format from PAL,
SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.
Select the system and
press OK button.
– PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and
adjusts itself to optimize its performance.
If the projector cannot reproduce proper video image, it is
necessary to select a specific component video signal format from
480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
– Auto
– Component Video Signal Format
Video or S-video
Y, Pb/Cb, Pr/Cr
The projector automatically detects incoming Video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
– Auto
AV System Menu icon
This box indicates the
system being selected.
Select the system and
press OK button.
AV System Menu icon
This box indicates the
system being selected.
2
1