Philips DVD740VR98 - Manual (Page 41)

POWER
MARKER
SEARCH MODE DISPLAY SLOW ZOOM
OUTPUT SELECT
3
4 5 6
7 8 9
SPEED
TIMER SET
0 +10
2 1
VCR DVD
CLEAR
REPEAT
SETUP
TITLE RETURN MODE
CHANNEL/SKIP
A-B
AUDIO ANGLE SUBTITLE
REC/OTR REPEAT
DISC
MENU OK
PAUSE
REW FF
PLAY STOP
VCR/TV
MEMORY
STATUS/EXIT TIME SEARCH
Time Search 41
Follow the steps below to program the DVD/VCR to search for-
ward or backward on a tape a specific length of time. There must
be a tape in the DVD/VCR.
● Before you begin, place the DVD/VCR in VCR mode. Press
OUTPUT SELECT so the green VIDEO light appears on the
front of the DVD/VCR. Press VCR/TV so the green VCR/TV
light appears on the front of the DVD/VCR.
1 Press VCR, then press SEARCH MODE/TIME
SEARCH.
2 Within 10 seconds, use the Number buttons to
enter the desired length of time you want to skip
forward or backward. For example, for 1 hour, 25 min-
utes, press Number buttons 1, 2, 5. Or, for five minutes,
press Number buttons 0, 0, 5.
3 Within 10 seconds, press FF g (B) or REW h
(s). The DVD/VCR will skip over the specified length of
time, then begin playback.
• If you want to search for more than
59 minutes, you must enter the
length of time in hours and minutes.
For example, to search forward 70
minutes, press 1,1,0 at step 2.
• You cannot do a Time Search while
recording.
• To remove the Time Search display,
press SEARCH MODE/TIME
SEARCH again.
• To cancel a Time Search that is in
progress, press STOP C (p).
• If the end of the tape is reached
during a Time Search, the Time
Search will be cancelled. The
DVD/VCR may rewind the tape.
Details are on page 43.
Helpful Hints
TIME SEARCH
0:00
ENTER SEARCH TIME
3
2
1
VCR
DVD740VR 4/12/02 12:09 PM Page 41