Philips DVD740VR98 - Manual (Page 12)

12 Hookups (cont’d)
DVD/VCR to a Stereo and to a TV that has Component Video In jacks
DVD/VCR
AUDIO OUT
DVD/VCR
OUT IN
COAXIAL
Y
Cb
Cr
S-VIDEO OUT
COMPONENT
VIDEO OUT
VIDEO
ANT-IN
ANT-OUT AUDIO
R L
R
CH3 CH4
L
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
AUDIO (LEFT) IN
AUDIO (RIGHT) IN
1
Y
Cb/Pb
Cr/Pr
COMPONENT
VIDEO IN
1 Connect the antenna or Cable TV signal to the ANT-IN (Antenna
In) jack of your DVD/VCR.
2 Connect the supplied red and white audio cables to the red and
white DVD/VCR AUDIO OUT Jacks on the DVD/VCR and to the
red and white AUDIO IN jacks on the Stereo, matching the cable
colors to the jack colors.
3 Connect component video cable (not supplied) to the COMPO-
NENT VIDEO OUT jacks on the DVD/VCR and to the COMPO-
NENT VIDEO IN jacks on the TV.
The Component Video connection only supplies video (picture) for the DVD Player of
the DVD/VCR. Therefore, in order to use the VCR features or view TV channels at
the DVD/VCR, you still need to either connect the RF coaxial cable between the
ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow
video cable. To connect the supplied RF coaxial cable, see step 2 on page eight. To
connect the supplied yellow video cable, see step 3 on page 11.
4 Connect the power cords of all the equipment to a power outlet.
Turn on the Stereo and select the Stereo’s Auxiliary IN station.
Turn on the TV and set it to the Component Video In channel. If
you are using the RF coaxial cable for VCR playback, choose channel 3 or 4 at
the TV. If you are using the red/white/yellow audio/video cables for VCR play-
back, choose the Audio/Video In channel at your TV. Or, simply continue
changing channels at the TV until you see VCR or DVD playback on the TV
screen.
5 You are ready to turn on the DVD/VCR. Go to page 15 before turn-
ing on the DVD/VCR.
6 After you complete the VCR setup as described on page 15, set
DOLBY DIGITAL to OFF in the DVD Player’s Setup menu. Details
are on page 70. If you play a DVD when the settings are wrong, the sound will
be distorted or you may damage the speakers.
3
2
Back of TV (example only)
DVD/VCR
Back of Stereo (example only)
1
Antenna/Cable
TV Signal
DVD740VR 4/12/02 12:08 PM Page 12