B&B Electronics Zlinx ZP Series - Manual (Page 20)

16 Manual Documentation Number: ZP24D-250RM-SR-2508
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Specifications
RF Properties
Physical Standard IEEE 802.15.4
Range up to 300 feet indoor or 1 mile outdoor
Frequency 2.4GHz
Transmit Power 100mW
Software Zlinx Manager
Support Windows 2000, 2003 Server, XP, and Vista
Antenna Options External Reverse Polarity SMA male jack
connector, omni directional (included with
product)
Radio Address Defaulted at factory, set by software otherwise
Serial settings
Baud 1200, 2400, 4800, 9600, 19200, 38400, 57600,
115200
Data bit 8 only
Parity None only
Stop bit 1 only
RS-232
Connector DB9F DCE
Lines TX, RX, RTS, CTS, DTR, DSR, DCD, RI, GND
Connector Removable terminal block
Lines TX, RX, GND
RS-422
Connector Removable terminal block
Lines 2 or 4 wire – TX+, TX-, RX+, RX-, GND (2 or 4
wire dipswitch selectable)
Termination 120 Ohm Dipswitch selectable
RS-485
Connector Removable terminal block
Lines 2 or 4 wire with SD control – TX+, TX-, RX+,
RX-, GND (2 or 4 wire dipswitch selectable)
SD control Bit wise
Termination 120 Ohm Dipswitch selectable
Transistor link
failure No wireless signal or RSSI LED off