B&B Electronics 232OPDRI - Manual

232OPDRI-0907 - 1/1
© 2006 by B&B Electronics. All rights reserved.
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
815-433-5100 Fax 433-5104 www.bb-elec.com [email protected] [email protected]
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland
+353 91 792444 Fax +353 91 792445 www.bb-europe.com [email protected] [email protected]
Integrate
– Expand
– Simplify
B&B ELECTRONICS
PRODUCT INFORMATION
Model: 232OPDRI
RS-232 Industrial Isolator
DIN Rail Mountable
Overview
The 232OPDRi is a DIN rail mountable RS-232 optical isolator. It isolates four RS-232 lines at 2KV, two lines in each
direction. The signals can be data or handshakes. Four LEDs show data traffic and one LED indicates power. The
connections are made through a DB9 male connector on the DTE side and a DB9 female connector on the DCE side.
The 232OPDR requires a single 10 to 48 VDC power supply, which is isolated from both sides of the converter.
The 232OPDRi is ideal for the industrial environment. The 2000 volt isolation protects your computer from ground
loops and induced currents caused by lightning, heavy equipment turning on and off, or the serial cable running close to
high power lines. The isolation also helps eliminate ground loops caused by different potentials on the grounds. The
isolated power supply allows you to hook up almost any DC power to this converter.
The 232OPDRi can also be used as a repeater to extend the RS-232 signal beyond 50 feet (15 meters). The signal
lines can handle either two data lines in each direction, or one data line and one handshake line in each direction.
3
2
7
8
5
3
2
7
8
5
2000 V
D
C
I
sol
at
io
n
+10 to +48 VDC
Power Circuit
Isolated
DCE
DB9
Female DTE
DB9
Male
Specifications
Dimensions: 4.9 x 4.2 x 1.3 in (12.4 x 10.5 x 3.2 cm)
Temperature Range: -40 to +80 °C (-40 to +176 °F)
Supply Voltage:
+10 to 48VDC (+/- 20%) @ 960mW
Data Rates: Up to 115.2K bps
Connectors: DB9 male, DB9 female
Isolation: 3-way isolation, 2000V RMS
input/output/power supply
Approvals:
UL, cUL, Class1 Div2
DECLARATION OF CONFORMITY
Manufacturer’s Name: B&B Electronics Manufacturing Company
Manufacturer’s Address: P.O. Box 1040
707 Dayton Road
Ottawa, IL 61350 USA
Model Numbers: 232OPDRi
Description: RS-232 Industrial Isolator
Type: Light industrial ITE equipment
Application of Council Directive: 89/336/EEC
Standards: EN 55022
EN 61000-6-1
EN 61000 (-4-2, -4-3, -4-4, -4-5, -4-6, -4-8, -4-11)
Michael J. Fahrion, Director of Engineering