B&B Electronics Zlinx ZP Series - Manual (Page 10)

6 Manual Documentation Number: ZP24D-250RM-SR-2508
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
LED Indicators
Note: In order for the RSSI LED to continuously indicate the signal strength, set the
“RP” command (RSSI PWM Timer) to FF.
Radio Frequency Information
• The ZP24D-250RM-SR has an indoor range up to
300 feet and an outdoor range up to one mile.
• These ranges are for line of sight installations using
the supplied antenna. Performance may vary
depending on your particular installation.
• The antenna connection on the radio modem is an
RPSMA female plug.
• B&B Electronics has a wide variety of accessory
antennas. Visit www.bb-elec.com for more
information.
Front Panel LED Status
Power Red = ON
OFF = No Power
RSSI (Signal Strength) Green = Strong
Yellow = OK
Red = Weak
OFF = No Signal
Wireless Data Green = Blink ON with
data
Model # Frequency Radio
Power RF Data
Rate
ZP24D-250RM-SR 2.4GHz Configurable
Up To
100mW
250Kbps