Philips Multimedia Control Panel - Manual (Page 46)

User Manual
46
Adjusting the Settings
Changing other device settings
1 On the screen ‘Set Up A/V Devices’, select a device and choose Edit.
The ‘Modify a Device’ screen will appear.
2 Choose Device Info.
The ‘Modify Device Details’ screen will
appear.
The Device Info Wizard will guide you through a
number of settings for the device that you have
selected. Choose OK to start the wizard.
Before proceeding with the wizard you can also
modify the IR control delays: different devices
of different brands have different timings for reacting when you turn on the device,
switch channels and select input. Normally the timing of these actions is automatically
defined during the initial setup. In the unusual event that this fails, you can edit the
delays manually. To do so, proceed as follows:
1 Choose Control Delays.
The ‘Control Delay Settings’ screen will
appear.
2 To edit the delays, click on the field.
■ Electronic Program Guide (EPG)
Your RC9800i comes with a 1 year free-of-charge subscription to the Philips Internet
EPG Service. Before you can use the EPG application on the RC9800i, you first must
perform a few service-related settings.
Attention! Some service-related settings are to be performed on a PC using a
Web browser, NOT on the RC9800i.
Service-related Settings on the PC
The following service-related settings are to be done on the PC:
■ Subscribing to the EPG service;
■ Personalizing your subscription, i.e. choosing the TV stations for which you want
EPG data.
Subscribing to the EPG Service
1 On your PC, go to http://www.homecontrol.philips.com.
2 Follow the ‘Philips Internet EPG Service’ link.
3 Register and choose a username and password.