Philips Multimedia Control Panel - Manual (Page 43)

User Manual
43
Adjusting the Settings
Screen Settings
Adjusting the Brightness
In the Screen Settings you can adjust the brightness of your touch screen by choosing
or .
Calibrating
If you notice that after some time the touch screen no longer responds accurately to
the screen areas you are touching, you can recalibrate the touch screen. To do so, tap
very precisely the center of the crosshairs that appear in the four corners of the screen.
The RC9800i may repeat this process a number of times, until its screen is accurately
calibrated.
Network Settings
1 In the ‘RC9800i Settings’ screen, choose Network.
The ‘RC9800i Network Settings’ screen will appear.
2 Perform the steps as explained in ‘Network Settings’ on page 15.
3 Choose Back.
Audio Settings
In the Audio settings you can change the following items by choosing or :
■ Touch screen Volume: volume produced when tapping the RC9800i soft buttons;
■ Hard Key Volume: volume produced when pressing the RC9800i hard keys;
■ Alert Volume: volume produced by the RC9800i when an error occurs.
You can test the changes you have made by choosing Try.
Date & Time
1 On the screen ‘RC9800i Settings’, choose Date & Time.
The ‘Date & Time Settings’ screen will appear.
2 Perform the steps as explained in ‘Date & Time Settings’ on page 17.
3 Choose Back.
■ Set Up Rooms & A/V Devices
To change your equipment settings, choose
Rooms & A/V Devices. The ‘Rooms & A/V
Devices’ screen will appear.
You can choose between two different options:
■ Add/Edit Rooms;
■ Add/Edit A/V Devices.