Philips Color Touch Screen Rem Cont w-Database - Manual (Page 28)

User Guide
28
Learning Direct-access and Action Buttons
Direct-access and action buttons can be programmed with a global function or
with functions per device.
• Buttons with functions per device execute commands depending on the active
device. For example, the left action button is the Play command when the VCR
is active.
• Buttons with global functions always execute the same command, no matter
what device is active.
Note Per device functions overrule global functions. For example, when you program the
Volume buttons globally, but you assign a specific function to them with the tuner,
the specific command will be executed when the tuner is the active device.
Learning a button per device
1 Switch to the device for which you want to program the button.
2 Complete instructions 2 to 7 in “Learning Control Panel Buttons” on
page 26. Instead of tapping a button on the touch screen, press the
direct-access button or the action button you want to program.
The label for the direct-access button you have pressed (e.g.
chan +) starts
flashing on the Remote Control icon.
The label above the action button you have pressed (e.g. play) starts flashing.
Learning a button globally
1 Tap the Home button .
2 Complete instructions 2 to 7 in “Learning Control Panel Buttons” on
page 26. Instead of tapping a button on the touch screen, press the
direct-access button or the action button you want to program.
The label for the direct-access button you have pressed (e.g.
chan +) starts
flashing on the Remote Control icon.
The label above the action button you have pressed (e.g. play) starts flashing.
Getting the Maximum out of it