Philips Color Touch Screen Rem Cont w-Database - Manual (Page 17)

User Guide
17
Getting Started
Example
You have defined a device action for the VCR: when you select the VCR, the TV switches to
channel number 10.
Now you want to keep watching channel 2 on the TV when you switch to the VCR for
rewinding a tape.
To display the control panel of the selected device without sending device action
commands, follow this procedure:
1 Tap the Device tab next to the Remote Control icon to
open the Device menu.
2 Press and hold one of the action buttons (labeled NO IR).
The Remote Control icon turns around , indicating that it will not send
IR codes to the selected device so that none of your devices will be affected.
3 Tap the device you want to select.
The control panel of the new selected device appears and the Remote Control
icon turns to its original position . You can now operate the new
selected device without affecting the previously active device.
Using the Action Buttons
The action buttons change function depending on the device the Remote Control is
operating. The current function is displayed on the touch screen right above the
button. The function can either be an IR (infrared) command which is transmitted,
system commands or a jump to a specific device page.
IR commands System commands
Using the Page Up and Page Down Buttons
Most devices have more than one control panel. You can scroll through these
control panels using the Page Up and Page Down buttons below the touch screen.
The panel number on the left of the touch screen indicates the active panel
number and the total number of panels, for example 1/6.
When there are more items in the Device menu or the Macro menu than can be
displayed, you can scroll through the menu with the Page Up and Page Down
buttons.
The color of the action buttons and the Page Up/Page Down buttons indicates in
which menu or panel you are working.