Before changing the settings (editing), Select the drum kit to edit, Chapter 8 – Boss Audio Systems DR-670 User Manual
Page 79
79
Chapter
8
Chapter 8 Creating Your Own Favorite Drum Kits (Drum Kit Edit Mode)
In Drum Kit Edit mode, you can select drum and
bass instruments, change the way they sound,
and make other changes to drum kit settings to
create up to 64 original User drum kits.
◆
To switch to Drum Kit Edit mode, hold
down [SHIFT] while the performance is
stopped and press Key Pad 9 (DRUM KIT
EDIT).
fig.08-00
fig.08-01
Before Changing the Settings (Editing)
Use the procedure below to change (edit) the
drum kit settings.
fig.08-02
* When the unit left the factory, the User drum
kits (65–128) contained the same settings as the
Preset drum kits (1–64).
■
Select the Drum Kit to Edit
1. Hold down [SHIFT] and press [DRUM A/
B] (DRUM KIT).
* Continue to hold down [SHIFT].
2. While holding down [SHIFT], rotate the
TEMPO/VALUE dial to select the drum kit
to be edited.
3. Release [SHIFT].
Holding down
Specify the Key Pads
Change the Settings
(Parameters)
Change the Settings
(Parameters)
Select the Drum Kit to Edit
User Drum Kit Finished
(
Editing the
)
Drum Parts
(
Editing the
)
Bass Part
You cannot edit the Preset drum kits.
If you want to base a new kit on a Preset
drum kit, you can copy the Preset to a User
drum kit first, then edit it to your liking.
For instructions on copying drum kits, refer
to “Copying Drum Kits” (p. 84).