Boss Audio Systems DR-670 - Manual (Page 17)

17
Quick Start
Quick Start
Making Connections
The DR-670 is not equipped with an internal amp or speakers. To hear sound, either connect
an amplifier and speakers or use stereo headphones.
Audio cables, MIDI cables, Stereo headphones, and foot switches are not included. You will
need to purchase these items from your dealer.
1
Before you begin making connections, confirm the following.
• Is the volume level of the DR-670 or connected amp turned all the way down?
• Is the power to the DR-670 or connected amp turned off?
To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before making any connections with the DR-
670.
fig.00-02
2
Connect the amp and audio gear as shown in the diagram.
If necessary, connect headphones and foot switches.
In order to take full advantage of the DR-670’s sound we recommend that you play it in
stereo.
When using the system in mono, connect to the OUTPUT L (MONO) jack.
* For instructions on connecting to the MIDI connectors, refer to p. 85.
* For instructions on connecting to the FOOT SW jack, refer to p. 34.
AC Adaptor
(PSA-series: Option)
Monitor Speaker Audio Set