Boss Audio Systems DR-670 - Manual (Page 34)

34
Quick Start
■ Using the Foot Switches
You can use up to two foot switches (such as the optional FS-5U) to start and stop
performance and insert fill-ins.
* When only one foot switch is connected, the foot switch only starts and stops performances.
* A special PCS-31 cable (optional) is required when connecting two foot switches.
fig.00-31
Foot switches connected with plugs that have a white stripe are used for starting and
stopping performances; foot switches connected with plugs that have a red stripe are used
for fill-ins.
To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power on all devices before connecting a foot switch.
When connecting the foot switch (the optional FS-5U) to the FOOT SW jack, set the polarity
switch as shown in the following figure.
fig.00-32
PCS-31: option
White Red
(Start/Stop performance) (Fill-Ins)
Polarity Switch