Brother PE 400D - Manual (Page 92)

89
IF THE THREAD BREAKS DURING EMBROIDERY
If the upper thread breaks
1. Stop the machine, raise the needle and foot, and rethread the
machine.
· If the bobbin thread breaks
1 Cut the upper thread, raise needle and foot, and re-
move hoop.
2 Reset the bobbin thread, then reattach hoop.
2. Press “ ” key.
4. Press “ ” key to go back a few stitches before the thread
broke.
* If unab le to retur n to the point the thread brok e,
Press “ ” key to go to first stitch of that color and then “
” key to adv ance near the point of the thread break-
age.
Returns to the first stitch of the color without sew-
ing.
Advances to the first stitch of the next color with-
out sewing.
Goes back one stitch at a time. Hold the button
down to change from 6 stitches at a time to 9
stitches at a time.
Goes forward one stitch at a time. Hold the but-
ton down to change from 6 stitches at a time to 9
stitches at a time.
3. Press “ ” key.