Brother PE 400D - Manual (Page 47)

44
OVERCASTING J
For use on medium or lightw eight f abrics. Attach the G f oot. Keep
foot guide along edge of f abric while sewing hem as illustrated in
the drawing.
1 Guide
5
3
Caution
Always be sure to use the right foot for the stitch you are sewing. Using the wrong foot could
cause the needle to hit the foot while sewing, which could result in broken needles and possible
injuries.
G
1 2 3 4
1 Over casting (Presser f oot “G”)
2 Over casting (Presser f oot “G”)
3 Elastic zigza g (Presser f oot “J”)
4 Zig za g (Presser f oot “J”)
Combination str aight stitch and o vercast zigzag. Use on heavy-
weight f abrics. Attach G f oot. Keep foot guide along edge of
fabric while se wing hem as illustrated in the dr awing.
1 Guide
5
3
Overcasting
Overcasting
CAUTION
After the stitch width has been adjusted, turn
the balance wheel by hand and check that the
needle does not touch the presser foot.
If it does touch, the needle may break and
cause an injury.
G
G
G
CAUTION
After the stitch width has been adjusted, turn
the balance wheel by hand and check that the
needle does not touch the presser foot.
If it does touch, the needle may break and
cause an injury.
G