Blind hem stitches – Brother PE 400D User Manual

Page 49

BLIND HEM STITCHES

1. Fold the f abric and baste it as illustr ated.

1 0.5 cm (1/64”)
2 Basting stitch
3 Overcasting
4 0.5 cm (1/64”)

Use the

on stretch f abrics and the

for other f abrics.

1 Blind hem stitc h
2 Blind hem stitc h

2. Attach presser f oot “R”. Lower the presser f oot so that its guide

meets the edge of the f olded hem.

1 Guide
2 Folded hem

3. Adjust the needle position using the stitch width setting k

eys

so that needle slightly catches the f old of the hem, and then
sew the f abric.

1 Needle drop position

4. Turn over the fabric and remove the basting stitch.

1 Reverse side
2 Surface