Belkin F5D9230UK4 - Manual (Page 40)

Alternate Setup Method
39 38 39 38
Setting your Connection Type if You Are a Telstra ® BigPond User
Your user name and password are provided to you by Telstra BigPond.
Enter this information below. Choosing your state from the drop-down
menu
(6)
will automatically fill in your login server IP address. If your
login server address is different than one provided here, you may
manually enter the login server IP address by placing a check in the
box next to “User Decide Login Server Manually”
(4)
and type in the
address next to “Login Server”
(5)
. When you have entered all of your
information, click “Apply Changes”
(7)
. After you apply the changes,
the Internet Status indicator will read “Connection OK” if your Router
is set up properly.
1. Select your State
Select your state from the drop-down menu
(6)
. The “Login
Server” box will automatically be filled in with an IP address.
If for some reason this address does not match the address
that Telstra has given, you can manually enter the login server
address. See “User Decide Login Server Manually”
(4)
.
2. User Name
Provided by your ISP. Type in your user name here.
(1)
(2)
(3)
(4)
(5)
(7)
(6)